Making Your Own Replacement Key For Saab 93 Viggen
Saab owners who lose a key might be concerned about the cost and inconvenience of replacing it. Fortunately, there is a way to avoid these expenses by making your own key fob.
You'll require a phillips screwdriver that is flathead to accomplish this. Place the screwdriver in the slot in the middle of the case, and slowly push it open.
Cost
Most SAABs come with two keys when they're new, however certain used cars only have one. In this case the owner will need to purchase an additional key. This can be costly. There are a variety of ways to save on this process. For instance, if you just require a new key fob case, you can save money by buying an old case from an auto dealer. These cases do not include the emergency badge or key, and tend to wear out quickly.
In addition to the cost of a brand new key, you will also need to pay for the installation and programming of the TWICE module. These costs can quickly mount up, especially if there is no spare key.
It is crucial to always have two keys for your vehicle. If you lose your only key, you will not be left without a vehicle.
The good news is that adding another key to your Saab 9-3 is not as complicated as it might seem. The only issue is that you have to pair the key with the computer in your car. This can be done through a dealer however it can take a while to make an appointment. Luckily, you can find the necessary information online to assist you with the process.
Installation
Most Saab vehicles built after 1995 have a special immobilizer system that utilizes a key-fob for controlling the car's engine. This system also controls remote and door locks for the vehicle. It is essential to keep an extra key in case you lose your original key or having your vehicle stolen. The positive side is that if you lose your sole working Saab key there are options to replace it without having to pay for an expensive dealer service.
First, you need to prepare the new keyfob. To do this, you will need an open-ended screwdriver to remove the case. Simply place the screwdriver in a small hole in the middle of the case and gently work it. If you're having trouble, try using different angles. Once you've opened your case, you'll be able to remove the electronics and place them in a new fob case.
Once you have the replacement fob and the key, you can begin the process of programming. You will need to connect your Tech2 to the computer and follow the steps for NG 9-3 using or without a transponder. It is recommended to utilize a TWICE replacement unit that is already mated to the correct key via an transponder. saab keys is possible to find this unit online. However, it is important to ensure that it is an OEM replacement.
Programming
In general, adding an extra key for a Saab 9-3 requires an instrument called a Tech 2. It also requires programming the vehicle to recognize the new keys. This process is much more complicated than simply copying the metal keys, and should be handled by a professional in order to avoid damaging the vehicle's electronic system. If you're considering acquiring the spare key to your car, it's best to do it as quickly as you can. If you put off, it could cost a lot more in the future.
It is also necessary to replace either the CIM or TWICE modules. This is usually an order-by-mail process and isn't something that you can do with an aftermarket provider. The cost of a new car can be very high depending on the model.
There's a better alternative to the dealer who will charge you top price to replace your car computer. S.A. Locksmith & Security can reprogram the EEPROM of your Saab computer and prepare your vehicle for the new key, thereby saving you the expense of a brand-new car computer! This service is quick, affordable and easy. It can save you up to up to 50% or more when compared to what a dealer would charge you! This is a fantastic solution for those who have lost their keys.
Remotes
The Saab 9-3 Viggen is one of the most original cars to sport the Saab badge. It was a Scandinavian front-drive, fighter jet-inspired machine that was incredibly fast and enjoyable to drive. Although many other Saab models followed it, none were as quirky.
It's crucial to replace your Saab 9-3's key fob when you lose it. Saab vehicles have an immobilizer system that requires a special key to begin. If you have a spare, the replacement process is fairly easy. But if you don't have one it could be costly and time-consuming.
You can save money if purchase an old key fob replacement and have it programmed locally by locksmiths. Be careful when buying used keys on eBay and other online shops. They might not be authentic, and you could pay more at the end.
Anyone can remove the electronics and battery of an old key fob by using the small screwdriver that is flathead. Be cautious not to damage the small electronic components inside the case. Be careful not to pour liquids into the case, as this could cause damage. Also, do not purchase a duplicate key from any aftermarket sellers as they may not be compatible with your car's CIM.